You can find a detailed guide in our e-manuals here.

The below reset can help if:
- Problems with WiFi Connection
- Problems with battery

Make sure that ZIPP 2 is running the latest firmware update. You can see this in the Libratone app under Settings.

Factory Reset:
A factory reset will remove all personalized settings on your speaker (including remembered Wi-Fi networks and Bluetooth connections). If you choose to perform a factory reset, you will have to set up the speaker from scratch afterward.

To perform a factory reset on your ZIPP2 or ZIPP2 Mini, hold the Nightingale and the power button on the back of your speaker simultaneously for 10 seconds while the speaker is ON.

The reset has initiated when the lights in the touch interface begin rotating. As soon as the reset has completed, the speaker will automatically enter setup mode.

Note: It is also possible to perform a factory reset by using the Libratone App.

Hard Reset:

1. Make sure your speaker is powered ON. If your speaker cannot be turned ON, please skip the first step.
2. Remove the power cable from your speaker.
3. Press and hold OFF/ON while you attach the power cable.
4. Let go of the OFF/ON button.

If setup fails we will recommend you to perform a FACTORY RESET and a new alternative SETUP.

FACTORY RESET

To perform a factory reset on your ZIPP2 or ZIPP2 Mini, hold the Nightingale and the power button on the back of your speaker simultaneously for 10 seconds while the speaker is ON.

The reset has initiated when the lights in the touch interface begin rotating. As soon as the reset has completed, the speaker will automatically enter setup mode.

Note: It is also possible to perform a factory reset by using the Libratone App.

SETUP

Mac computer

1. Ensure your speaker is in setup mode (activated out of the box). Setup mode is signaled by a side-by-side blinking signal on the Touch Interface.
2. On your Mac, open Wi-Fi
3. Select your speaker (i.e. Libratone ZIPP2 300763) in "New AirPlay speaker"
4. Check that Network is your preferred network and press "Next"
5. You will hear an audio cue when setup is done
6. Press "Done"
7. Your speaker is now connected to your Wi-Fi and ready to be played

 iOS (iPhone, iPad)

1. Ensure your speaker is in setup mode (activated out of the box). Setup mode is signaled by a side-by-side blinking signal on the Touch Interface. 
2. On your iOS device, open "Settings" + "Wi-Fi"
3. In "Set up new airplay speaker” select your speaker (ie. Libratone ZIPP2 300763)
4. Check that Network is your preferred network and press "Next"
5. You will hear an audio cue when setup is done
6. Press "Done"
7. Your speaker is now connected to your Wi-Fi and ready to be played

Android

1. Ensure your speaker is in setup mode (activated out of the box). Setup mode is signaled by a side-by-side blinking signal on the Touch Interface.
2. On your Android device, open "Settings" + "Wi-Fi"
3. Select your speaker (ie. Libratone ZIPP2 300763)
4. Open a web browser and enter 192.168.1.1
5. Press the menu button up on the right-hand side
6. Select "Setup"
7. Select "Wi-Fi" Network
8. Enter "Wi-Fi" Password and press "Apply settings"
9. After the reboot, your speaker will be connected to your home Wi-Fi network ready to be played

From time to time new firmware is released to introduce new cool features.

Use the Libratone app to perform the firmware update.

To update, simply tap your product and follow the instructions.

An addition to the ZIPP2 compared to ZIPP1 is the new menu layer where you can update the firmware directly on the speaker.

You'll find the icon with "a square and an arrow" to be flashing if your speaker needs an update.

Note 

• Always upgrade your Libratone app to the latest version before updating speaker firmware.
• Always connect your speaker to mains before starting the firmware update.
• An exclamation mark can also mean "Weak Wi-Fi signal strength".
• A firmware update can also be signaled as "a square with an arrow" as shown here:

If you did not choose to activate Alexa on the first setup you can do it by selecting your speaker in the Soundspace menu and then tapping the microphone symbol as shown below.

Make sure to have an Amazon account ready to sign in when prompted to do so. Otherwise, simply follow the instructions on the screen and Alexa will be set up in no time!

Our ZIPP is working with the system calls "last action wins" That means it will automatically take

the latest available connection and play on that.

There is no function to manually skip from Bluetooth to Wifi.

E.g. you are listening to the radio over Wifi and you get an SMS on your phone which is connected over

Bluetooth to your speaker. The ZIPP will switch from Wifi to Bluetooth because there is a new source

coming.

If you would like to avoid such switches, you need to turn the Bluetooth connection from your phone to

your ZIPP, off.

We suggest keeping the power plugged since ZIPP has smart battery system which keeps the battery life longer.

Feel free to get in touch with our customer support. They are happy to answer all your questions. Just click the "Contact Support" button below.