You can find a detailed guide in our e-manuals here.

FACTORY RESET:

Switch off Libratone speaker

Maintain logo button pressure and switch on the Libratone speaker (don’t release button until you see solid yellow in logo button).

Starting

a) no light (10 sec): maintain logo button pressure

b) fast yellow (10 sec): maintain logo button pressure

c) solid yellow: let go of logo button

Pulsing yellow approx.  70 times and your Libratone speaker is restarting.

Speaker is ready in setup mode when logo button is

a) RED fast pulsing (2012 speaker firmware)

b) WHITE breathing (2014 speaker firmware)

If set up fails, please factory reset your speaker and then do alternative setup:

SETUP:

• Open Wi-Fi settings on your PC/Mac and connect to the Libratone network (Libratone XXXXXX)
• Start your internet browser
• Enter 192.168.1.1 in the URL. and press “ENTER”
• The Libratone setup page opens
• Choose your home network and enter the password
• Press “Apply settings”
• Open Wi-Fi settings on your PC/Mac and connect to your home network
• Logo button Pulsing YELLOW, the speaker is restarting
• Logo button changes to pulsing WHITE, speaker is ready for AirPlay.

• Check that router is supporting 802.11g in 2,4 GHz and that it’s activated (5 GHz not supported)
• WPA2 (AES) (WEP is not recommended)
• Use only letters and numbers in router name/password and speaker name. Don’t use any special characters like:
  -_/*!”?=)(.æø

Feel free to get in touch with our customer support. They are happy to answer all your questions. Just click the "Contact Support" button below.